ABSTRACT
ABSTRACT The aim of this study was to evaluate the precision and accuracy of molds made with four commercial brands of alginate scanned at different times using digital model analysis. Eighty molds of a standard Typodont were made using 4 types of alginate (CCC: Cavex Color Change; IA: Identic Alginate; HY5: Hydrogum 5 and JP: Jeltrate Plus). The molds were scanned at four times: immediately (T1), 24h (T2), 72h (T3) and 120h (T4) after molding. Measurements were taken in three dimensions: anteroposterior, transverse and vertical. Significant differences in dimensional changes were noted between the materials over time (p <0.05). Anteroposterior dimensional variation was noted between times, especially for IA and JP. For transverse and vertical variables, a difference was found between the groups, especially at 24 h, 72 h and 120 h. CCC presented significant dimensional shrinkage only at T120 (transverse). IA and JP presented larger dimensional distortions in the vertical measurements. The molding materials used were not dimensionally stable when evaluated after 120 hours of molding. However, such evidence suggests that alginates with longer storage time, such as Cavex Color Change, are more accurate than conventional alginates.
RESUMO O objetivo do presente estudo foi avaliar a precisao e acurácia por meio de análise de modelos digitais de moldes digitalizados obtidos com quatro marcas comerciais de alginato em diferentes tempos. Oitenta moldes de um Typodont padrao foram obtidos utilizando 4 tipos de alginato (CCC: Cavex Color Change; IA: Identic Alginate; HY5: Hydrogum 5 e JP: Jeltrate Plus). Os moldes foram escaneados em quatro tempos: mediatamente (T1), 24h (T2), 72h (T3) e 120h (T4) após a moldagem. As medidas foram feitas em très dimensoes: ântero-posterior, transversal e vertical. Diferenças significativas nas mudanças dimensionais foram observadas entre os materiais ao longo do tempo (p <0,05). Variação dimensional ântero-posterior foi observada entre os tempos, principalmente para IA e JP. Para as variáveis transversal e vertical houve diferenga entre os grupos, principalmente em 24h, 72h e 120h. CCC apresentou contração dimensional significativa apenas em T120 (transversal). IA e JP apresentaram maiores distorções dimensionais na vertical. Os materiais de moldagem utilizados nao foram dimensionalmente estáveis quando avaliados após 120 horas de moldagem. No entanto, tais evidencias sugerem que os alginatos com maior tempo de armazenamento, como Cavex Color Change, sao mais precisos do que os alginatos convencionais.
Subject(s)
Humans , Dental Impression Materials/chemistry , Models, Dental , Alginates/chemistry , Materials Testing , Dental Impression TechniqueABSTRACT
ABSTRACT: The aim of this study was to carry out a literature review on the accuracy of conventional and digital dental impression methods, as well as present the various three-dimensional intraoral scanning systems. A bibliographic search was carried out in PUBMED's main health database, in which works published between 2008 and 2018 were collected. Laboratory studies, case reports and systematic reviews were included, addressing topics that deal with conventional digital materials, impression and precision. Articles that did not evaluate impression materials, their behavior and techniques to obtain a good impression of oral structures were excluded. Through a review in the literature, obtained the following findings: the most critical stage in macking a dental prothesis is to take the dental impression. The conventional technique of impression consists of obtaining a negative copy of the intra-oral situation that will be poured into gypsum, obtaining a positive copy, on which the work will be carried out. Digital scanning systems were not superior to conventional moldings when comparing fidelity, accuracy and detail reproduction; in contrast, they were superior to conventional impression when considering clinical chair time, patient and operator preference, and patient comfort.
RESUMEN: El objetivo de este estudio consistió en realizar una revisión bibliográfica sobre la precisión de los métodos de moldeo dental convencionales y digitales, así como presentar los diversos sistemas de escaneo intraoral tridimensionales. Se realizó una búsqueda bibliográfica en la base de datos de salud principal de PUBMED en la cual se recopilaron trabajos publicados entre 2008 y 2018. Se incluyeron estudios de laboratorio, informes de casos y revisiones sistemáticas, abordando temas que tratan con materiales digitales convencionales, moldeo y precisión. Se excluyeron los artículos que no evaluaron los materiales de moldeo, su comportamiento y técnicas para obtener una buena impresión de las estructuras orales. A través de una revisión exhaustiva en la literatura, obtuvimos los siguientes hallazgos: el paso más crítico en la preparación de una pieza protésica es la impresión de la preparación. La técnica convencional de moldeo consiste en obtener una copia negativa de la situación intraoral que se verterá en el yeso, obteniendo una copia positiva, sobre la cual se realizará el trabajo. Resulta que los sistemas de escaneo digital no fueron superiores a las molduras convencionales al comparar la fidelidad, precisión y reproducción de detalles; en cambio, fueron superiores a las molduras convencionales al considerar el tiempo de trabajo clínico, la preferencia del paciente y del operador y la comodidad del paciente.
Subject(s)
Humans , Dental Impression Technique/classification , Dental Impression Technique/instrumentation , Dental Impression Materials/chemistry , Dental Prosthesis Design , Printing, Three-DimensionalABSTRACT
Abstract The objective of this study was to evaluate the marginal and internal fit of zirconia copings obtained with different digital scanning methods. A human mandibular first molar was set in a typodont with its adjacent and antagonist teeth and prepared for an all-ceramic crown. Digital impressions were made using an intraoral scanner (3Shape). Polyvinyl siloxane impressions and Type IV gypsum models were also obtained and scanned with a benchtop laboratory scanner (3Shape D700). Ten zirconia copings were fabricated for each group using CAD-CAM technology. The marginal and internal fit of the zirconia copings was assessed by the silicone replica technique. Four sections of each replica were obtained, and each section was evaluated at four points: marginal gap (MG), axial wall (AW), axio-occlusal edge (AO) and centro-occlusal wall (CO), using an image analyzing software. The data were submitted to one-way ANOVA and Tukey's test (α = 0.05). They showed statistically significant differences for MG, AO and CO. Regarding MG, intraoral scanning showed lower gap values, whereas gypsum model scanning showed higher gap values. Regarding AO and CO, intraoral digital scanning showed lower gap values. Polyvinyl siloxane impression scanning and gypsum model scanning showed higher gap values and were statistically similar. It can be concluded that intraoral digital scanning provided a lower mean gap value, in comparison with conventional impressions and gypsum casts scanned with a standard benchtop laboratory scanner.
Subject(s)
Humans , Zirconium/chemistry , Dental Impression Technique/instrumentation , Dental Marginal Adaptation , Polyvinyls/chemistry , Reference Values , Siloxanes/chemistry , Image Processing, Computer-Assisted/instrumentation , Materials Testing , Calcium Sulfate/chemistry , Reproducibility of Results , Analysis of Variance , Dental Casting Technique , Dental Prosthesis Design , Computer-Aided Design , Dental Impression Materials/chemistryABSTRACT
Abstract The aim of the study was to evaluate the effect of the incorporation of different fillers on an experimental vinyl polysiloxane (VPS) at two different concentrations, 20% and 40%. Different fillers were added to an experimental VPS. The study was developed in two stages: (i) incorporation of fillers in different concentrations: (a) 20 wt% fillers, and (b) 40 wt%. The fillers were added to experimental VPS and mixed with a speed mixer; (ii) characterization of experimental VPS; after the base paste and catalyst paste were mixed, the experimental VPS was used to make specimens specifically for each test, which were stored at 23°C for 24 hours. The tests were designed according to the specific standardization for the analysis of tensile strength, detail reproduction, Shore A hardness, and elastic recovery. For analysis of filler size pattern, scanning electron microscopy at 1500× magnification was used. The aerosil OX-50 40% (AE), and pure aluminum hydroxide 40% (PAH) groups presented the highest tensile strength and Shore A hardness values. However, those were the only groups that did not present continuous detail reproduction of an intersection of 20 μm line. The elastic recovery was not statistically significant. The undesirable characteristics of VPS (lowest Shore A hardness and tensile strength) were observed when it was added to the composition of acrylic polymer (AP) and fiberglass (FG) in both concentrations, 20% and 40%. In groups AE and PAH, agglomerates of nanofillers were shown in SEM micrography, while the other groups presented different shapes and fillers sizes.
Subject(s)
Polyvinyls/chemistry , Siloxanes/chemistry , Dental Impression Materials/chemistry , Particle Size , Reference Values , Surface Properties , Tensile Strength , Time Factors , Materials Testing , Microscopy, Electron, Scanning , Reproducibility of Results , Analysis of Variance , Elasticity , Hardness TestsABSTRACT
This study compared the surface detail reproduction and dimensional accuracy of stone models obtained from molds prepared using different alginate impression materials (Cavex Color Change, Hydrogum 5, or Jeltrate Plus) and with different storage times (1, 3, and 5 days) to models from molds that were filled immediatel y with no storage time. The molds were prepared over a matrix containing 50-μm line, (ISO 1563 standard) under pressure with a perforated metal tray. The molds were removed2 minutes after loss of sticky consistency and either filled immediately or stored in closed jars at 100% relative humidity and 37°C for 1, 3, or 5 days. The molds were filled with dental plaster (Durone IV). Surface detail reproduction and dimensional accuracy were evaluated using optical microscopy on the 50-μmwide line, which was 25 mm in length, according to ISO 1563 standard. The dimensional accuracy results (%) were subjected to analysis of variance. The 50-μm wide line (ISO 1563 standard)was completely reproduced by all alginate impression materials regardless of the storage time. There was no statistically significant difference in the mean dimensional accuracy values of stone models made from molds composed of different alginate impression materials and with different storage times (p = 0.989).In conclusion, storing the mold for five days prior to filling did not change the surface detail reproduction or dimensional accuracy of the alginates examined in this study.
Este estudo comparou a reprodução de detalhes da superfície e estabilidade dimensional de modelos de gesso obtidos a partir de diferentes alginatos (Cavex Color Change, Hydrogum 5, Jeltrate Plus) e com diferentes tempos de armazenagem (1, 3, e 5 dias)para modelos obtidos de moldes que foram preenchidos imediatamente sem tempo de armazenagem. Os moldes foram preparados sobre matriz contendo linha de 50 μm (norma ISO1563) realizado sob pressão com moldeira de metal perfurada.Os moldes foram removidos 2 minutos após a perda de consistência pegajosa e preenchidos imediatamente ou armazenado sem frascos fechados com temperatura (37°C) e umidade relativa(100%) controladas por 1, 3 ou 5 dias. Os moldes foram preenchidos com gesso dental (Durone IV). A reprodução de detalhes da superfície e a estabilidade dimensional foram avaliadas usando microscopia óptica na linha 50 μm com 25 mm de comprimento, de acordo com a norma ISO 1563. Os resultados de estabilidade dimensional (%) foram submetidos á análise de variância. A linha de 50 μm (norma ISO 1563) foi completamente reproduzida por todos os alginatos, independentemente do tempo de armazenagem. Não houve diferença estatisticamente significa -tiva nos valores médios de estabilidade de modelos de gesso obtidos de moldes de diferentes alginatos com diferentes tempos de armazenagem (p = 0.989). Em conclusão, o armazenamento do molde durante cinco dias antes do preenchimento não alterou a reprodução de detalhes da superfície ou estabilidade dimensional dos alginatos examinadas neste estudo.
Subject(s)
Alginates/chemistry , Models, Dental , Dental Impression Materials/chemistry , Surface Properties , Colloids/chemistry , Materials and Supplies Stockpiling , Materials Testing , Data Interpretation, Statistical , Time FactorsABSTRACT
Purpose: This study was aimed to determine the effect of various tray spacer thickness and subsequent repeated pours on the accuracy and dimensional stability of the impression made from monophasic polyvinyl siloxane material. Materials and Methods: Custom trays with different spacer thickness (2, 4 and 6 mm) were used for making an impression of a master model simulating 3 unit fixed partial denture with monophasic polyvinyl siloxane material. These impressions were poured with die stone and repoured. Distance between the reference points were measured and subjected to statistical analysis. Result: Casts obtained from 1 st , 2 nd and 3 rd pour of the impression in 2, 4 and 6 mm spacer thickness tray have similar dimensional accuracy amongst each other and with the master model except in molar diameter and inter-abutment distances of cast obtained from 6 mm spacer thickness tray. Conclusion: The vertical distance of stone dies were decreased, whereas horizontal distance increased as the thickness of impression material is increased. There were statistically non-significant changes occurring among the repeated pours in 2, 4 and 6 mm spacer thickness. Clinical Implication: 2 and 4 mm spacer thickness are acceptable for making an impression for three unit fixed partial denture with monophasic polyvinyl siloxane material and it was not affected by two subsequent (1 st and 2 nd ) repeated pours.
Subject(s)
Dental Impression Materials/chemistry , Dental Impression Materials/instrumentation , Models, Dental , Materials Testing , Polyvinyls/chemistry , Siloxanes/chemistry , Surface PropertiesABSTRACT
Good exposure of the preparation margins and haemostasis in the sulcular gingiva are necessary for accurate impressions to produce precise restorations. The use of cordless retraction paste material in implant dentistry is a relatively novel application. However, few studies have been conducted on the use of retraction pastes and their possible interaction with implant surfaces. Recent literature has described remnants on titanium implant surfaces and expressed the need for an assessment of the biocompatibility of the exposed surface (Chang et al.). This in vitro study evaluated the effect of a cordless gingival retraction paste on sterile titanium disks. Surface chemistry was determined using energy-dispersive X-ray spectroscopy (EDS), and further investigated using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). After exposure to retraction paste, surface chemistry alterations were identified. A fibroblast cell line (L929) was exposed to the disks and the live/dead viability/cytotoxicity assay was used to determine any effects on the proliferation and health of cells. The disks exposed to the retraction paste showed fewer dead cells compared to the unexposed disks. This was statistically significant.
Subject(s)
Humans , Dental Impression Materials/chemistry , Dental Impression Technique/instrumentation , Fibroblasts , Gingival Retraction Techniques/instrumentation , Titanium , Biocompatible Materials , Cell Survival , Dental Implants , Materials Testing , Microscopy, Electron, Scanning , Ointments/chemistry , Spectrometry, X-Ray Emission , Surface Properties , Tandem Mass Spectrometry , Time FactorsABSTRACT
The aim of this study was to evaluate the physical properties of irreversible hydrocolloid materials poured immediately and after different storage periods. Four alginates were tested: Color Change (Cavex); Hydrogum (Zhermack); Hydrogum 5 (Zhermack); and Hydro Print Premium (Coltene). Their physical properties, including the recovery from deformation (n = 3), compressive strength (n = 3), and detail reproduction and gypsum compatibility (n = 3), were analyzed according to ANSI/ADA specification no. 18. Specimens were stored at 23ºC and humidity and were then poured with gypsum immediately and after 1, 2, 3, 4, and 5 days. The data were analyzed by two-way analysis of variance (ANOVA) and Tukey's test at p < 0.05. All of the alginate impression materials tested exhibited detail reproduction and gypsum compatibility at all times. Hydro Print Premium and Hydrogum 5 showed recovery from deformation, as established by ANSI/ADA specification no. 18, after 5 days of storage. As the storage time increased, the compressive strength values also increased. Considering the properties of compounds' recovery from deformation, compressive strength, and detail reproduction and gypsum compatibility, irreversible hydrocolloids should be poured immediately.
Subject(s)
Humans , Colloids/chemistry , Dental Impression Technique , Dental Impression Materials/chemistry , Analysis of Variance , Compressive Strength , Calcium Sulfate/chemistry , Materials Testing , Surface Properties , Time FactorsABSTRACT
The aim of this study was to verify the influence of the time of contact between alginate and gypsum after the modeling procedure on the properties of the plaster cast, such as surface detail, dimensional stability and microhardness. Thirty cylindrical specimens of orthodontic gypsum Type III were made by means of impressions of a stainless steel master model which had five reference lines in the upper surface. The samples were divided into two groups: Group 1 (G1) - with time of contact of 1 hour; and Group 2 (G2) - 12 hours of contact. All the specimens were stored up to 48 hours until they underwent laboratory testing. Surface detail and dimensional stability were tested by one calibrated examiner using a visual analysis and a profilometer (Profile Projector Nikon model 6C, Nikon Corporation, Tokyo, Japan), respectively, to evaluate the quality of reproduction of the lines and the distances between them. The microhardness was determined for each sample by making six indentations with a Vickers diamond pyramid indenter (Buehler, Lake Bluff, USA) under a load of 100 gF for 15 s. The results showed significant difference (P £ 0.05) between groups in two of the three properties examined: surface detail and microhardness, which decreased as the time of contact rose. The 12-hour time of contact between alginate and the plaster cast is not recommended because it influences the quality of the plaster cast.
Subject(s)
Alginates/chemistry , Casts, Surgical , Calcium Sulfate/chemistry , Dental Impression Technique , Dental Impression Materials/chemistry , Chi-Square Distribution , Glucuronic Acid/chemistry , Hardness Tests , Hexuronic Acids/chemistry , Materials Testing , Statistics, Nonparametric , Surface Properties , Time FactorsABSTRACT
Addition silicone impression materials have been used as impression material for more than 20 years. Although they are among the most expensive impression materials, they became popular during the past decade as they have excellent physical properties. Prevention of infection is an important aspect in dental treatment since dental professionals are routinely exposed to the wide variety of microorganisms present in saliva. Gloves are the most common protective measure used during dental treatment. The gloves are mostly made of latex. In this study, we examine how the setting time of three types polyvinyl putty materials were affected by the use of five different brands of latex gloves and one brand of vinyl gloves. Each material was first mixed without wearing gloves according to the manufacturer's instructions. After the stipulated mixing time, the setting time was measured using the Vicat needle. The setting time is measured from the time of mixing till the time that the needle does not produce any indentation on the surface of the material. The putty material was then mixed with gloved hands (using the five different brands of latex gloves in turn) and the setting time was measured. Then the material was mixed with washed gloved hands, and the setting time was measured again. Finally, the material was mixed with vinyl gloved hands and the setting time was measured. The following conclusions were drawn from the study: Reprosil™ and Express™ showed significant variation in the setting time with the latex gloved hands. There was no significant variation in the setting time when material was mixed with unwashed vs washed gloved hands. Vinyl gloves did not significantly affect the setting time of any of the putty impression materials.
Subject(s)
Dental Impression Materials/chemistry , Gloves, Surgical/classification , Hardness , Humans , Latex/chemistry , Materials Testing , Polymerization , Polyvinyls/chemistry , Siloxanes/chemistry , Soaps/chemistry , Surface Properties , Time Factors , Vinyl Compounds/chemistryABSTRACT
Background: Traditionally, inlay casting waxes have been used to fabricate patterns for castings. Newer resin pattern materials offer greater rigidity and strength, allowing easier laboratory and intraoral adjustment without the fear of pattern damage. They also claim to possess a greater dimensional stability when compared to inlay wax. Aims: This study attempted to determine and compare the marginal accuracy of patterns fabricated from an inlay casting wax, an autopolymerized pattern resin and a light polymerized pattern resin on storage off the die for varying time intervals. Materials and Methods: Ten patterns each were fabricated from an inlay casting wax (GC Corp., Tokyo, Japan), an autopolymerized resin pattern material (Pattern resin, GC Corp, Tokyo, Japan) and a light-cured resin pattern material (Palavit GLC, Hereaus Kulzer GmbH, Germany). The completed patterns were stored off the die at room temperature. Marginal gaps were evaluated by reseating the patterns on their respective dies and observing it under a stereomicroscope at 1, 12, and 24 h intervals after pattern fabrication. Results: The results revealed that the inlay wax showed a significantly greater marginal discrepancy at the 12 and 24 h intervals. The autopolymerized resin showed an initial (at 1 h) marginal discrepancy slightly greater than inlay wax, but showed a significantly less marginal gap (as compared to inlay wax) at the other two time intervals. The light-cured resin proved to be significantly more dimensionally stable, and showed minimal change during the storage period. Conclusion: The resin pattern materials studied, undergo a significantly less dimensional change than the inlay waxes on prolonged storage. They would possibly be a better alternative to inlay wax in situations requiring high precision or when delayed investment (more than 1 h) of patterns can be expected.
Subject(s)
Dental Casting Investment/chemistry , Dental Casting Technique/standards , Dental Impression Materials/chemistry , Dental Marginal Adaptation , Humans , Image Processing, Computer-Assisted/methods , Inlay Casting Wax/chemistry , Materials Testing , Methylmethacrylates/chemistry , Polymerization , Polymethyl Methacrylate/chemistry , Surface Properties , Temperature , Time FactorsABSTRACT
Aim: The aim of this in vitro study was to evaluate the flexural bond strength of porcelain to combinations of used and new nickel-chromium alloy in various proportions. Materials and Methods: Used and new nickel-chromium bonding alloys were combined in various proportions (groups I to V; 10 samples per group) and their flexural bond strengths with porcelain were compared. A three-point loading system was used for the application of load. Load was applied at a constant speed of 0.5 mm/minute and the load required to fracture the porcelain was recorded for each specimen. Statistical Analysis Used: (a) Analysis of variance (ANOVA) and (b) Duncan's multiple range tests. Results: The best bond strength values were seen when 100% new alloy was used. According to the findings of this study, there was no adverse effects noted with up to 75% recast metal, but serious changes were found in the bond strength values when 100% old metal was used. Conclusions: The following conclusions were drawn from the study Fresh nickel-chromium alloy shows the greatest porcelain adherence. There is no significant change in bond strength of ceramic to alloy with up to 75% of used nickel-chromium alloy. At least 25%- of new alloy should be added when recycled nickel-chromium alloy is being used for metal ceramic restorations.
Subject(s)
Adhesiveness , Aluminum Silicates/chemistry , Chromium Alloys/chemistry , Dental Bonding , Dental Casting Technique , Dental Impression Materials/chemistry , Dental Porcelain/chemistry , Dental Stress Analysis/instrumentation , Equipment Reuse , Humans , Materials Testing , Methylmethacrylates/chemistry , Pliability , Potassium Compounds/chemistry , Stress, MechanicalABSTRACT
Context: Mounting the maxillary and mandibular dentulous casts for Diagnostic purpose requires many steps (including making maxillary and mandibular impressions, face-bow transfer, and bite registration) or many appointments. A simple new technique of doing all of this together without compromising on the accuracy can save time over the conventional mounting procedure. Aim: To compare the accuracy of a new technique of a single-step diagnostic mounting procedure with that of the conventional diagnostic mounting procedure. Materials and Methods: Ten dentulous patients with the full complement of teeth and without any history of temporomandibular disorder and orthodontic treatment were selected for this study. A detachable metal triple tray to replace the fork part of the face bow fork that further could be attached to face bow was fabricated. Dual-arch impressions and face-bow transfer were made in these subjects using this modified triple tray. These mountings were compared with the ones done with the conventional mounting procedure. Five linear measurements (using stable reference points on the articulator and the cast) were made and the values obtained by both the methods were compared. Statistical Analysis: The Student's 't' test for statistical analysis was used in this study. Results: The measurement values obtained by the single-step method were almost similar to the ones obtained by the conventional method. The various mean measurements for the single step and conventional methods were 37.7 ± 6.8 and 38.5 ± 6.5 mm; 70.0 ± 4.4 and 70.1 ± 4.2 mm; 57.0 ± 4.9 and 57.3 ± 4.2 mm; 71.3 ± 4.5 and 71.0 ± 4.6 mm; and 58.7 ± 2.5 and 58.3 ± 2.3 mm; respectively. The differences between the values obtained by the conventional and single-step methods were not statistically significant. Conclusion: The single-step procedure of diagnostic mounting can be used as an alternative to the conventional method, without compromising the quality of mounting.
Subject(s)
Adult , Alginates/chemistry , Calcium Sulfate/chemistry , Colloids/chemistry , Dental Articulators , Dental Impression Materials/chemistry , Dental Impression Technique/instrumentation , Dental Impression Technique/statistics & numerical data , Models, Dental , Dental Occlusion , Equipment Design , Humans , Jaw Relation Record/instrumentation , Jaw Relation Record/methods , Mandible/anatomy & histology , Maxilla/anatomy & histology , Time Factors , Young AdultABSTRACT
Infection control ideology, disinfection/ sterilization protocols and cross infection control has been a baseline requirement for every invasive procedure. Dental Impression recording a pre-requisite for all dental procedures could be a source of cross infection if the protocols are not known, understood, accepted or followed. Aim of this study was thus to assess through a questionnaire the base line knowledge of dental students and dental graduates regarding infection control measurements associated with dental impression recording. A total of 78 House surgeons and Final Year students who consented were included in the study. The filled a valid questionnaire identifying the Dental Impression recording related cross infection issues. SPSS 17.0 was used for statistical evaluation. It was inferred that 66.7% of study group felt that metallic impression trays and another 13% felt that disposable impression trays should be used to prevent cross contamination. It was an important finding that 93.6% of study group was aware of appropriate need of disposal of disposable impression trays however method of disposal were different. 100% study group was sending the impression out after washing or disinfecting them which were an incredible finding, however they should be encouraged for disinfection of impression. It was thus inferred from the results that though students and graduate are well aware of infection control procedures and are following them however structured infection control standards teaching can improve standard further
Subject(s)
Humans , Infection Control, Dental , Dental Impression Materials/chemistry , Dental Impression Technique/instrumentation , Students, Dental , Education, Dental , Surveys and Questionnaires , Evaluation Studies as Topic , Attitude of Health Personnel , Cross-Sectional StudiesABSTRACT
This study compared the surface detail reproduction and dimensional accuracy of stone models obtained from molds disinfected with 2% sodium hypochlorite, 2% chlorhexidine digluconate or 0.2% peracetic acid to models produced using molds which were not disinfected, with 3 alginate materials (Cavex ColorChange, Hydrogum 5 and Jeltrate Plus). The molds were prepared over matrix containing 20-, 50-, and 75-µm lines, performed under pressure with perforated metal tray. The molds were removed following gelation and either disinfected (using one of the solutions by spraying followed by storage in closed jars for 15 min) or not disinfected. The samples were divided into 12 groups (n=5). Molds were filled with dental gypsum Durone IV and 1 h after the start of the stone mixing the models were separated from the tray. Surface detail reproduction and dimensional accuracy were evaluated using optical microscopy on the 50-µm line with 25 mm in length, in accordance with the ISO 1563 standard. The dimensional accuracy results (%) were subjected to ANOVA. The 50 µm-line was completely reproduced by all alginate impression materials regardless of the disinfection procedure. There was no statistically significant difference in the mean values of dimensional accuracy in combinations between disinfectant procedure and alginate impression material (p=0.2130) or for independent factors. The disinfectant solutions and alginate materials used in this study are no factors of choice regarding the surface detail reproduction and dimensional accuracy of stone models.
Este estudo comparou a reprodução de detalhes da superfície e alteração dimensional de modelos de gesso obtidos a partir de moldes desinfetados com hipoclorito de sódio 2%, digluconato de clorexidina 2%, ou ácido peracético 0,2% a modelos confeccionados utilizando moldes que não foram desinfetados com três alginatos (Cavex ColorChange, Hydrogum 5, Jeltrate Plus). Os moldes foram preparados sobre matriz contendo linhas de 20, 50 e 75 µm realizado sob pressão com moldeira de metal perfurada. Os moldes foram removidos após a geleificação e desinfetados (utilizando uma das soluções por pulverização, armazenados em frascos fechados durante 15 min) ou não desinfetados. Assim, as amostras foram divididas em 12 grupos (n=5). Os moldes foram preenchidos com gesso dental Durone IV e uma hora após a manipulação do gesso os modelos foram separados da moldeira. A reprodução de detalhes da superfície e a precisão dimensional foram avaliadas usando microscopia óptica na linha 50 µm com 25 mm de comprimento, de acordo com a norma ISO 1563. Os resultados de precisão dimensional (%) foram submetidos à ANOVA. A linha de 50 µm foi completamente reproduzida por todos os alginatos, independentemente do processo de desinfecção. Não houve diferença estatisticamente significativa nos valores médios de precisão dimensional nas combinações entre procedimento de desinfecção e alginato (p=0,2130), ou para fatores independentes. Soluções desinfetantes e alginatos utilizados neste estudo não são fatores de escolha em relação à reprodução de detalhes da superfície e alteração dimensional de modelos de gesso.
Subject(s)
Humans , Alginates/chemistry , Calcium Sulfate/chemistry , Models, Dental , Dental Disinfectants/chemistry , Dental Impression Materials/chemistry , Chlorhexidine/analogs & derivatives , Chlorhexidine/chemistry , Colloids/chemistry , Dental Impression Technique/instrumentation , Materials Testing , Microscopy , Organic Chemicals/chemistry , Pressure , Peracetic Acid/chemistry , Surface Properties , Sodium Hypochlorite/chemistry , Time FactorsABSTRACT
OBJECTIVES: This study investigated the possible interactions between three addition silicone materials (Express®, Aquasil Ultra® and Adsil®), three hemostatic agents (ferric sulfate, StatGel FS®; aluminum sulfate, GelCord®; and aluminum chloride, Hemostop®) and gingival retraction cords previously handled with latex gloves to determine whether direct contact with medicaments or indirect contamination by latex in conditions similar to those found in clinical practice inhibit or affect the setting of the impression materials. MATERIAL AND METHODS: A portable device for the simultaneous test of several specimens was specifically developed for this study. Polymerization inhibition was analyzed by examination of the impressions and the molded surface. Ten trials were performed for each addition silicone material used in the study, at a total of 240 study samples. RESULTS: All the samples tested (N=240) were nonreactive regardless of the type of combination used. CONCLUSIONS: Aluminum sulfate, ferric sulfate and aluminum chloride hemostatic solutions did not show any inhibitory potential on the addition silicone samples under study, and there were no changes in polymerization as a result of contact between addition silicone and retraction cords handled with latex gloves.
Subject(s)
Dental Impression Materials/chemistry , Gloves, Surgical , Hemostatics/chemistry , Latex/chemistry , Polymerization/drug effects , Polyvinyls/chemistry , Siloxanes/chemistry , Sulfur/chemistry , Gingival Retraction Techniques , Materials Testing , Surface Properties , Silicones/chemistryABSTRACT
Cordless retraction paste material for gingival retraction in implant dentistry has recently become of interest to the clinician. However, few studies have been conducted on the use of retraction pastes and their possible interaction with implant surfaces. This in vitro study evaluated the effect of a cordless retraction paste material, Expasyl® (Acteon), on TiUnite® (Nobel Biocare) implant surfaces. Three areas of the fixtures were evaluated before and after contact with the retraction paste using scanning electron microscopy to evaluate changes in surface topography and energy-dispersive spectroscopy to identify any surface chemistry modifications. Alteration of the initial surface after exposure to Expasyl® was identified, with the implant collar showing the most changes.
Subject(s)
Humans , Dental Implants , Dental Impression Materials/chemistry , Dental Impression Technique/instrumentation , Gingival Retraction Techniques/instrumentation , Analysis of Variance , Materials Testing , Microscopy, Electron, Scanning , Spectrometry, X-Ray Emission , Surface Properties , Time Factors , Titanium/chemistryABSTRACT
Background and Objectives: A limitation of vinyl polysiloxane (VPS) impression materials is hydrophobicity, and manufacturers have added surfactants and labeled these new products as "hydrophilic." The purpose of this investigation was to evaluate and compare the dimensional accuracy and surface detail reproduction of two hydrophilic VPS impression materials under dry, moist, and wet conditions. Materials and Methods: Ten impressions were made under dry, moist, and wet conditions respectively, with monophase, and regular body VPS impression material using a stainless steel metal die similar to that described in American Dental Association (ADA) specification 19, with lines scribed on it. Dimensional accuracy was measured by comparing the average length of the middle horizontal line in each impression to the same line on the metal die, by using a measuring microscope. The surface detail was evaluated. A one-way analysis of variance and Student t-test were used to compare mean dimensional changes (α = 0.05). Results: Conditions (dry, moist, and wet) did not cause significant adverse effects on the dimensional accuracy of either material. The mean dimensional changes were 0.00084% (+0.00041%) for monophase and 0.00119% (+0.00033%) for regular body. Monophase material was satisfactory in detail reproduction 100% of the time in dry conditions, 90% in moist, and only 20% in wet conditions. The regular body showed 100% satisfactory impressions in dry, 80% in moist, and 10% in wet conditions. With the additional smooth surface evaluation, only under dry conditions impressions with clinically acceptable surface quality were produced. Conclusions: Dimensional changes for both materials were well within ADA standards of minimal shrinkage value of 0.5%.
Subject(s)
Dental Impression Materials/chemistry , Dental Impression Technique/instrumentation , Desiccation , Humans , Hydrophobic and Hydrophilic Interactions , Materials Testing , Microscopy , Polymerization , Polyvinyls/chemistry , Siloxanes/chemistry , Surface Properties , Temperature , Water/chemistry , WettabilityABSTRACT
Aim: The purpose of this study was comparative evaluation of sagittal condylar values of arcon and non-arcon articulators with cephalometric readings and to determine the amount of discrepancy in sagittal condylar guidance values between arcon and non-arcon articulators using same protrusive record. Materials and Methods: Twenty subjects in the age group of 19-35 years, free from temporomandibular joint dysfunction, and occlusal disharmony, with healthy dentition participated in the study. Hanau H2 (non-arcon type) and Hanau Wide-Vue (arcon type) articulators were programmed for sagittal condylar guidance values using the same protrusive record made in polysiloxane bite registration material with edge to edge degree of protrusion. The resultant values for both the articulators on either side were compared with values obtained from tracing of digital lateral cephalogram using Kodak Dental imaging Window software 6.6.3.0-C program. The tabulated data were subjected to statistical analysis, ANOVA (Fishers 'F' test) for group comparison, Tukey's HSD test for inter-comparison, student's unpaired 't' test for intra-group comparison, and level of significance (P) was calculated using the same. Results: The mean sagittal condylar guidance values of the three different groups were found to be very highly significant (P=0.001) and highly significant (P=0.002) on the right and left sides respectively. There was a very highly significant difference (P=0.001) and highly significant difference (P=0.003) between the arcon and non-arcon group on the right and left side respectively. No significant difference was found between the arcon and cephalometric group (P=0.284 right, P=0.853 left) and a statistically significant difference was found between the non-arcon and cephalometric group (P=0.049 right, P=0.015 left). On intragroup comparison there was no statistically significant difference in sagittal condylar values on the right and left sides. Conclusion: The mean difference in the sagittal condylar guidance values obtained from non-arcon and arcon articulators shows a low level of reproducibility, and no significant difference found in mean sagittal condylar values obtained from arcon articulator and cephalometric tracings indicates replication of sagittal condylar guidance value from image of articular eminence.
Subject(s)
Adult , Centric Relation , Cephalometry/methods , Dental Articulators/classification , Dental Impression Materials/chemistry , Models, Dental , Dental Occlusion , Humans , Image Processing, Computer-Assisted/methods , Jaw Relation Record/instrumentation , Mandibular Condyle/physiology , Radiography, Dental, Digital/methods , Siloxanes/chemistry , Young AdultABSTRACT
Background: Most of the materials (casts, impressions, etc.) that are sent to the dental laboratories show the presence of numerous pathogenic microorganisms. All the spray disinfectants are not equally effective against these microorganisms. Aims and Objectives: The aim was to compare the effectiveness of different spray disinfectants on irreversible hydrocolloid impressions and to find out the most effective dilution, contact time, and effect against each microorganism studied. Materials and Methods: The effects of four spray disinfectants, 5.25% sodium hypochlorite, 0.525% sodium hypochlorite, 1:213 (1 part in 213 parts of water) povidone iodine, and 2% glutaraldehyde along with control (distilled water) on irreversible hydrocolloid impressions contaminated with Staphylococcus aureus, Bacillus subtilis and Streptococcus viridans were studied. Results: Sodium hypochlorite, 5.25%, showed 1-min exposure time which was able to effect a 4log10 reduction in bacterial counts against S. aureus and S. viridans followed by 0.525% sodium hypochlorite and 2% glutaraldehyde for 10 min. None were able to effect a 4 log10 reduction against B. subtilis. Conclusion: Sodium hypochlorite with a concentration of 5.25% was the most effective disinfectant and required the shortest contact time (1 min). Not all ADA-approved concentrations of surface disinfectants work equally well on irreversible hydrocolloid impression materials.